HYDROPHILIC WATERSTOPS

Pronil ACR

Tested by BBA

Self-adhesive option

Tape, plugs and rings

Expands up to 900%

7 bar

A range of acrylic polymer-based waterstops that swell on contact with water to seal joints and gaps in concrete. Available as tapes, plugs and rings to suit different application details.

Applications: Concrete construction joints, wall-to-base connections and pipe penetrations.


  • Pronil ACR Material Safety Data Sheet

    Pronil ACR Material Safety Data Sheet

    Material Safety Data Sheet for the PRONIL ACR hydrophilic waterstop.

  • BBA Test Report

    BBA Test Report

    Test report issued by the British Board of Agrément (BBA).

  • ACR Brochure

    ACR Brochure

    Discover PRONIL ACR hydrophilic waterstops for concrete joint sealing. Download the product brochure for an overview of the range.


Pronil ACR is a new generation high performance acrylic polymer based expanding tape. It expands up to 900% when in contact with water. In a totally dry state, Pronil ACR will shrink to its original installation dimension and re-expand on wetting. Pronil ACR is used in concrete construction for the sealing of construction joints including wall to base connections, pipe entry systems, sealing of openings and interface sections between existing and new concrete. Pronil ACR is easily stored in it’s original moisture-proof wrap in cool, dry conditions away from sunlight. 


ACR-300

Self-adhesive option

Tap water, wet/dry difference ≥300%
Concrete water (14 days) ≥200%
3% salt water (14 days) ≥100%
Water pressure resistance (14 days): 7 bar
Colour: Red

ACR-600

Self-adhesive option

Tap water, wet/dry difference ≥600%
Concrete water (14 days) ≥400%
3% salt water (14 days) ≥200%
Water pressure resistance (14 days): 7 bar
Colour: Yellow

ACR-900

Self-adhesive option

Tap water, wet/dry difference ≥1300%
Rain water (14 days) ≥900%
Concrete water (14 days) ≥600%
3% salt water (14 days) ≥300%
5% salt water (14 days) ≥260%
10% salt water (14 days) ≥240%
Water pressure resistance (14 days): 7 bar
Colour: Blue

Plugs & Rings

Day 7 ≥300%
Wet/dry difference ≥300%
Water pressure resistance (14 days): 7 bar
Colour: Red, Blue


Advantages

Conformable, can be used on a variety of irregular substrates.

Forms an impermeable barrier against water in concrete.

Excellent compliance with deformed surfaces and joints.

Saves time and labour.

Easy to apply.

Simple overlap jointing on site.

No hardening time required.

No welding required.

Swells in salt water. 


Technical Data

The increase in volume was measured when specimens were immersed in tap water at 23°C over a 28 day period. Recovery volume was measured when the specimens were removed from the solution and air dried over a 28 day period. This method was repeated over three cycles. The percentage change in volume calculations are all based on the initial volume. 

Application Temperature: -10°C / 50°C 

Density: 1,40 g/cm3

Shore: 50

The expansion rating is affected according to CaCO3 and salt content. Contains no traces of Bentonite.



Standard Sizes

Tape size (mm)Roll length (m)Total per box (m)
5 × 2020140
10 × 201070
20 × 20525
20 × 25525
20 × 30525
30 × 30520
5 × 1002040

Applications

Wall Application

ACR wall application detail

Tunnel Application

ACR tunnel application detail

BBA Test Results

Our acrylic waterstops were tested by the British Board of Agrément (BBA). Test No. T1-61007. Read the BBA Test Report.

BBA test results
BBA swelling and recovery test results